Need help?Do you have a question about the XTA 5 series and is the answer not in the manual?
General| Series | 5 Series |
|---|---|
| Output Channels | 8 |
| Type | Audio Processor |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Dynamic Range | >110dB |
| Output Impedance | 50Ω |
| Sampling Rate | 96kHz |
| Signal-to-Noise Ratio | >110dB |
| Power Supply | 90-240VAC, 50-60Hz |
Instructions for safely removing the unit from its packaging and initial inspection.
Guide to understanding the controls, displays, and LEDs on the front of the unit.
Details the various connectors and ports located on the rear of the device.
Covers powering on the unit, initialisation, and basic operating procedures.
Explains signal routing possibilities and the function of various audio processing blocks.
Adjusting gain, delay, graphic EQ, parametric EQ, and dynamic EQ for input channels.
Configuring output parameters like gain, filters, EQ, compressor, and limiter.
How to link multiple input or output channels for synchronized parameter control.
Explains different EQ response types (GQ600, Special) and their sonic characteristics.
Details on dynamic EQ modes, thresholds, ratios, and practical applications.
Covers crossover filter slopes, time alignment, and various parametric filter types.
Detailed breakdown of the unit's menu structure and system configuration options.
Managing memory presets, cloning units, and implementing security lock-out features.
Information on connecting and using RS232, RS485, and AES digital interfaces for control and audio.
Procedures for setting up password protection and locking unit parameters.
Technical specifications of the unit, warranty information, and optional accessories.
To Next Page
