Operator’s Manual Page 29
Memory Structure
As with the DP226 and DP224, the 5 Series
5 Series 5 Series
5 Series have their memories split into sections, allowing independent recall of
crossover settings (i.e. all parameters associated with outputs), and input settings. Additionally, the graphic equaliser
settings and dynamic equaliser settings are stored in independent locations.
There are, therefore, four types of memory available –INPUT
INPUTINPUT
INPUT, CROSSOVER, DYNAMIC
CROSSOVER, DYNAMIC CROSSOVER, DYNAMIC
CROSSOVER, DYNAMIC and GRAPHIC
GRAPHICGRAPHIC
GRAPHIC.
These, and all combinations of memory types, appear in the GLO
GLOGLO
GLOBAL
BALBAL
BAL MEMORY
MEMORYMEMORY
MEMORY Sub
SubSub
Sub Menu
MenuMenu
Menu, and its operation
warrants a little more explanation.
Selecting to Store
StoreStore
Store or Recall
RecallRecall
Recall using the Global
GlobalGlobal
Global Memory
MemoryMemory
Memory option offers the possibility of storing various
combinations of the available memory types, and these are selected using the B
BB
BACK
ACKACK
ACK and NEXT
NEXTNEXT
NEXT keys.
To explain how this all works, please consider the following example.
There are 10 memories stored in the unit with various combinations of input, graphic, DEQ and crossover memories.
As can be seen, different memory locations contain different combinations of the three memory types available. If it is
required to recall a location that contains everything (Input, Graphic, DEQ, and Crossover settings), this will limit the
selection as shown overleaf…
To Next Page
Loading...
Need help?
General
