Xtreamer media player - XP Folder Access Troubleshooting

Advanced Users Guide
English
5. If folder accessing in window XP isn’t available.
The instruction is subject to there isn’t any problem in IP, Network Workgroup, Computer’s name,
and so on. You, therefore, need to check Security set up part.
Note:
This instruction will be able to have effect on changing value, registry key correction in system, hence,
you must not change other set value incorrect setting value will be able to cause serious damage to
1. Click [Start] – [Control Panel] - [Administrative Tools] [Local Security Policy] – [User Rights Assignment].
1-1. Everyone, Users and Guest must be included in “Access this computer from network”.
1-2. Add Everyone, Users and Guest if there is missing one in there.
1-3. If there are Everyone, Users and Guest in “Deny Access to this computer form the network”, delete 3 of
these accounts
you
must
not
change
other
set
value
,
incorrect
setting
value
will
be
able
to
cause
serious
damage
to
your system].
these
accounts
.
1-4. Users and Guest must be included in “Log on locally”.
1-5. Users and Guest must not be included in “Deny log on locally”.
1-6. everyone and Users must be included in “By pass traverse checking”.
2. Click [Start] – [Control Panel] –[Administrative Tools] – [Local Security Policy] – [Security Option].
2-1. Network Security: [Send LM & NTCM responses] in “Authentication Level”.
2-2. Network Access : [Disabled] in “Don’t allow anonymous enumeration of SAM accounts and shares”.
3
. Click [Start]
–
[Control Panel]
–
[Firewall].
3
.
Click
[Start]
[Control
Panel]
[Firewall].
3-1. Check on [File and Printer Sharing] in “Exception” tap menu.
4. Click [Start] – [Control Panel] – [Administrative Tools] – [Services].
4-1. Computer Browser: [Started in Status ] - [Automatic in Startup type].
4-2. Server: [Started in Status ] – [Automatic in Startup type].
4-3. Workstation: [Status Started] – [Startup type Automatic].
5. Click [Start] – [Run] and type [regedit] then click [OK].
5
-
1
[HKEY LOCAL MACHINE]
–
[SYSTEM]
–
[Current Control Set]
–
[Control]
–
[
Lsarestrictanonymous
]
5
1
[HKEY
_
LOCAL
_
MACHINE]
[SYSTEM]
[Current
Control
Set]
[Control]
[
Lsarestrictanonymous
]
“Lsarestrictanonymous” Value must be [0]. If there is no item, which means the value is the same as “0”.
6. Once completed, you should reboot your computer so that setting value can be applied.
78