Xtreme TX91 - Troubleshooting

Xtreme Power Conversion Corporaon
TX91 3.8- 10kVA User’s Manual
Page 29
Uninterrupble Power Supply
4 Troubleshooting
If the UPS system is not functioning correctly, please reference the tables below to isolate the issue.
4.1 Audible Alarm
Descripon Buzzer status Can be Muted?
UPS status
Bypass mode Beeping once every 2 minutes
YesBaery mode Beeping once every 4 seconds
Fault mode Beeping connuously
Warning
Overload Beeping twice every second
Yes
Others Beeping once every second
Fault
All Beeping connuously Yes
4.2 Warning Indicator
Warning Icon (ashing) Alarm
Baery low Beeping every second
Overload Beeping twice every second
Baery unconnected Beeping every second
Over charge Beeping every second
EPO enable Beeping every second
Fan failure/Over temperature Beeping every second
Charger failure Beeping every second
I/P fuse broken Beeping every second
Overload 3 mes in 30min Beeping every second