Xylem EXO Series - Page 116

e undersigned hereby declares that the products listed below conform with the Australian and New Zea-
land Electromagnetic Compatibility (EMC) requirements for generic products to be used in residential,
commercial, and light industrial environments, and carry the C-Tick mark accordingly.
Manufacturer: YSI Incorporated, a Xylem brand
1725 Brannum Lane
Yellow Springs, OH 45387 USA
Equipment name: EXO Sondes (EXO1 and EXO2) and EXO Handheld Systems
Model numbers: 599501-xx, 599511-xx, 599502-xx, 599512-xx, 599150
Accessories/Sensors: 599090-xx, 599100-xx, 599101-xx, 599102-xx, 599104-xx, 599118-xx, 599800,
599810, 599870-xx, 599040-xx, 599008-xx, EXOISE0x
Intentional Radiators: EXO Sondes (EXO1 and EXO2) contain the LMX Bluetooth module. Nemko
certied body ID #CE 2302. C-Tick number N136.
EXO Handheld (599150) contains a Wi-Fi/Bluetooth module. Nemko certied
body ID #CE 2302. C-Tick number N136.
Directives:
• EMC 2004/108/EC
• Australian ACMA Standards for C-Tick mark, Section 182 of the Radiocommunications Act 1992.
• New Zealand RSM Standards, Radiocommunications Act 1992.
Harmonized Standards:
• EN61326-1:2006, Electrical equipment for measurement, control, and laboratory use – EMC require-
ments – Part 1: General Requirements.
Lisa M. Abel, Director, Quality
June 7, 2012
pg | 116