pg | 33
Attach Sonde to Handheld
Bluetooth Wireless
Users can wirelessly connect EXO sondes (above water) to the EXO Handheld using Bluetooth wireless. With
Bluetooth, users can reduce the amount of cables needed to operate their sonde. is wireless connection
has a typical range of 10 meters, but this range will uctuate depending on the operating environment. Users
cannot wirelessly connect through water.
In order to connect via wireless, both devices must be powered on.
1 Activate sonde’s Bluetooth.
Activate Bluetooth by holding a magnet at the magnetic
activation area. In addition to magnetic activation, users
can also activate Bluetooth by cycling power to the sonde
(remove/reinstall batteries).
2 Discover sonde in KOR.
Every time the Handheld powers on, it automatically
searches for a sonde via the hard-wired cable connection.
3 Rescan sonde.
If a wired connection is not found, and to manually
establish a connection to a sonde via Bluetooth, navigate to
the Connections menu in KOR soware on the Handheld.
Select Rescan. KOR will rescan and detect Bluetooth-
enabled sondes. Select the sonde from the list and then
click the Connect button.
2.7
To Next Page
Loading...
