Please see the Explanation of MULITPLIERS paragraph in Section 3.4 for further
information.
• Formatted (w/o Multiplier and Units): Multiplier and Unit information (if any) is not
applied to the reading shown on the display of the VXU laptop. The reading that is
shown on the laptop will reflect only the wheels on the register that are read electronically
or manually.
• Formatted (with Multiplier and Units): Multiplier and Unit information (if any) is applied
to the reading shown on the display of the VXU laptop. The reading shown will reflect the
actual reading, combined with the multiplier that is provided from the billing software.
• Unformatted: The meter readings will appear as the raw reading data string from the
register.
• Apply Display Type to Reading: This setting will apply a label to the reading display,
which reflects the units represented. (i.e. US Gallons, Cubic Feet, Cubic Meters). This
label must be imported from the billing software as a 2-digit code number.
• Apply Display Type to High/Low Limits: This setting will apply a label to the High/Low
limits, which reflects the units represented. This label must be imported from the billing
software as a 2-digit code number.
3 Polling Devices | 44
To Next Page
Loading...
Need help?
General
