The Alarm Summary report lists a summary of power failures for electric meters on a
particular route. In addition, the status/error byte value may provide explanations as to
why the failures occurred. For EWRs (manufacturer value = E1), this value is a two-byte
hexadecimal. For iCons, this value is a four-byte hexadecimal. A plus sign (+) listed before a
Meter ID indicates a non-route meter.
AMR ID/Meter ID Mismatch
Available in RadioRead, VehicleRead and PhonRead Protocols and printed either
automatically or individually from the Reports tab.
The AMR ID/Meter ID Mismatch report lists meters for which the imported meter interface
device (MXU or MIU) ID from billing differs from the actual device ID (the one from which the
reading occurred.)
AMR Master Route
Available in RadioRead, VehicleRead, and PhonRead Protocols and printed either
automatically or individually from the Reports tab.
9 Reports | 98
To Next Page
Loading...
