Operation with OxiTop
®
-IDS measuring heads Multi 3630/3620 IDS
28 ba77045e01 09/2019
5.4 Transmitting data (USB interfaces)
1 Set name, Sample name, head ID and type
2 Mean value, standard deviation (with more than 2 measuring heads),
number of measuring heads in the sample
3 Graphic display of the measured values of all measuring heads of
the sample
More functions to evaluate the sample (see section 5.3 E
VALUATING
THE SAMPLES).
4 Using <M>, switch to the OxiTop set management.
Basic information on data transmission to the USB interfaces and
on the settings for the USB interfaces is given in the operating man-
ual of your meter.
1 Connect the output device to a USB interface.
USB-A: USB printer, USB memory device
USB-B: PC
2 Using <M>, open the OxiTop set management.
3 Using <><>, highlight a Set.
4 Open the details of the selected set with <MENU/ENTER>.
The measuring heads automatically call up the current data of the set.
The readout takes between 3 and 30 seconds per OxiTop
®
-IDS mea-
suring head, depending on the number of measuring data. If there are
many measuring data, it may take considerably longer.
5 Using <><>, select a sample.
6 Using <PRT_> or <PRT>, output the data to the USB interfaces.
363 mg/l 210 mg/l
79 Free measuring heads
190216-1 A-1 BOD5
28.05.2019 08:00
1
2
3
To Next Page
Loading...
