Appendix C: Configuration Menu, explains the purpose of the Configuration Menu (which is to
create and manage load/dump configurations), and describes how to use the initialization
configuration menu to perform the following tasks:
• Select and view the protocols for image and parameter loading, and dumping
(create load/dump configurations)
• Specify information for directed TFTP loading
• Select a network segment
• Initialize parameters
• Revert to stored configuration
• Revert to factory defaults
• Enable display of load status messages
• Configure memory
• Exit
Appendix D: Troubleshooting, describes what to do if you encounter a problem during
installation or server operation. This appendix explains how the terminal server indicates
self-test errors, how to reset the unit, and possible solutions to problems you might encounter
when using the unit.
7
To Next Page
Loading...