Configuration Menu
C.3.5 Option S - Exit Saving Configuration Changes
To select this option, answer S to the "Enter menu selection" prompt of the Terminal Server
Configuration Menu (Figure C-1). If you have made any changes, the configuration menu
prompts:
Save changes and exit (Y,N) [Y]?
If the unit is configured to store parameters locally, you see this message:
Updating configuration data; please wait...
If you have not made any changes, the configuration menu displays:
No changes made. Exit Configuration menu (Y,N) [Y]?
To exit from the Configuration menu, press RETURN. If you do not want to exit from the
menu, type 'N' and press RETURN; the Configuration menu appears.
C.3.6 Option X - Exit Without Saving Configuration Changes
To select this option, answer X to the "Enter menu selection" prompt. If you have made
changes, the configuration menu prompts:
Exit without saving changes (Y/N) [N]?
Valid answers to this prompt are Y (Yes) and N (No). To exit the Configuration menu, type
'Y' and press RETURN. If you do not want to exit from the menu, simply press RETURN;
the Configuration menu appears.
If you have not made any changes, the configuration menu displays:
No changes made. Exit Configuration menu (Y,N) [Y]?
To exit from the Configuration menu, press RETURN. If you do not want to exit from the
menu, type 'N' and press RETURN; the Configuration menu appears.
0021 C-77
To Next Page
Loading...
General