Name: Xyplex Terminal Server 720
Brand: Xyplex
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Configuration Menu

Select specific protocol(s) by removing letters from or adding letters to the brackets. To

remove a letter, type the letter and press RETURN. The prompt reappears; however, the

letter you typed does not appear within the brackets. To add a letter to those within the

brackets, type the letter and press RETURN. The prompt reappears and the letter you typed

is included within the brackets.

When the letters within the brackets represent all the protocols you want to use, press

RETURN.

2. The configuration menu prompts:

Enable ALL methods for parameter loading (Y,N) [Y]?

Valid answers to this prompt are:

Y -- Use any parameter loading method: XMOP (Xyplex proprietary protocol), MOP (DEC

Maintenance Operations Protocol), BOOTP (Bootstrap Protocol), RARP (Reverse Address

Resolution Protocol)

N -- Use specific method(s)).

a. If you answer Y, proceed to Step 3.

b. If you select N, the configuration menu prompts:

Toggle (CARD,XMOP,MOP,BOOTP,RARP) parameter load methods [C,X,M,B,R]:

Valid answers to this prompt are C (Memory card), X (Xyplex Proprietary protocol), M

(DEC MOP loader), B (BOOTP) or R (RARP). You can select up to four parameter

loading methods.

Selecting C enables the unit to store and load parameters from a Memory card. Selecting X

enables the Terminal Server 720 to store and load parameters at a Xyplex MAXserver

Manager or at another Network 9000 module which has a memory card. Selecting M

enables the unit to store and load parameters via the DEC MOP loader protocol. Selecting B

enables the unit to store and load parameters at a BOOTP/TFTP host. Selecting R enables

the unit to store and load parameters via RARP/TFTP.