EasyManuals Logo

Xyplex Terminal Server 720 User Manual

Default Icon
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Configuration Menu
You can also use numerical values to specify that a MOP (Maintenance Operations
Protocol) loader is to determine the appropriate load file based on information contained in
the NCP (Network Control Program) database.
Valid numerical values consist of the pound-sign character (#) and a number in the range
of 0 through 128. Xyplex load servers respond to the numbers #1 through #5. The default
numerical value is #1. The numerical value #1 allows you to specify a load file name via
the NCP commands at a VAX/VMS load server, or via client entries on a MAXserver
loader or Network 9000 Card with a Memory card. Numerical values #2 through #4 are
reserved for use by Xyplex. The numerical value #5 requires a Xyplex load server, which
can be a Network 9000 card with a Memory card or a MAXserver Manager card
(MAXMAN), to ignore the load request -- unless the load server's client database contains
a node entry for the requesting terminal server. (The numerical value #5 is useful when
you want to require that a specific Xyplex load server be used to load the unit.) Numerical
values #6 through #128 are currently undefined.
Type your answer and press RETURN.
5. If Directed TFTP is enabled, the following prompts appear:
Enter unit IP address [0.0.0.0]:
Enter the Internet address of the Terminal Server 720 unit, or press RETURN to accept
the default address, 0.0.0.0. You must supply a non-zero Internet address if (in step 1)
you have specified all image loading protocols or Directed TFTP (DTFTP) as an
image loading method.
Enter host IP address [0.0.0.0]:
Enter the Internet address of the load host, or press RETURN to accept the default
address, 0.0.0.0. You must supply a non-zero Internet address if if (in step 1) you have
specified all image loading protocols or Directed TFTP (DTFTP) as an image loading
method.
Enter gateway IP address [0.0.0.0]:
If the load host is not on the same network as the unit, enter the Internet address of a
gateway.
Enter TFTP load filename []:
Enter the name of the file to load (max. 64 characters)
C-72 0021

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xyplex Terminal Server 720 and is the answer not in the manual?

Xyplex Terminal Server 720 Specifications

General IconGeneral
BrandXyplex
ModelTerminal Server 720
CategoryServer
LanguageEnglish