EasyManuals Logo

Yaesu FT-4XR User Manual

Yaesu FT-4XR
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
13
Approximate Operating Time and Remaining Charge Level
Indication
Approximate operating time for the transceiver with the fully charged lithium-
Ion battery pack (SBR-28LI), and the indication of the remaining charge level
of the battery is shown in the below table:
Frequency band Band in Use Charge Level Indication (Icon)
144 MHz band Approx. 15 hours
*
:Full battery charge
:Enough battery charge
: Battery is depleted.
Charge battery.
:
(When blinking) Charge
battery immediately.
430 MHz band
Approx. 14 hours
*
FM Broadcast Band Approx. 12.0 hours
*
: The battery charge level calculations are based on an operating cycle of:
TX:RX:Standby = 5:5:90
(TX Power 5 W, RX audio output 200 mW, Battery save 200 ms)
Operation
Switching between VFO-A, VFO-B and Memory mode
Press the [ V/M] key repeatedly to toggle the fre-
quency control between the VFO-A, VFO-B and the
Memory mode.
Selecting the Operating Band
Press the [#BAND] key to select the desired fre-
quency band.
Frequency ranges for each frequency band are below:
430 MHz band144 MHz band FM Broadcast Band
FM broadcast band may be received in VFO-B only.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yaesu FT-4XR and is the answer not in the manual?

Yaesu FT-4XR Specifications

General IconGeneral
BrandYaesu
ModelFT-4XR
CategoryTransceiver
LanguageEnglish

Related product manuals