Yaesu FT-4XR User Manual

18
Using the Memory
The FT-4XR/XE transceiver incorporates Large-capacity memory channels
that can register the operating frequency, communication mode, and other
operational information.
• 200 Memory Channels
• 3 Home Channels
• 10 pairs PMS Memory channel
Each memory channel can store the following information:
• Operating frequency • Frequency steps • TX output power
• Memory tag • Repeater information • Tone information
• DCS information • Skip memory information
10 Memory Banks, labeled “BANK 1” through “BANK10”. Each Memory Bank
can be assigned up to 200 channels from the “standard” and “PMS” memory
channels.
200
199
4
3
2
1
L10/U10
L09/U09
L04/U04
L03/U03
L02/U02
L01/U01
Memory Channel Configuration of the Transceiver
Memory channels
（
200 channels
）
Home channels
(3 channels)
Memory banks
(10 banks)
Up to 200 memory channels can be
registered to each bank.
(One memory channel can be registered
to several memory banks
）
PMS memory channels
(10 sets)
For additional details on the PMS memory channel and
Memory Bank, refer to the Advanced Manual which may be
downloaded from the Yaesu website.
CAUTIONS!
The information registered to memory channels can be
corrupted by incorrect operation, static electricity, or electrical
noise. Also, it can be erased in the event of a failure or repair. Be
sure to keep a record of the settings on paper.

Yaesu FT-4XR Specifications

General

Brand	Yaesu
Model	FT-4XR
Category	Transceiver
Language	English