30
Specifications
● General
Frequency Range RX: 136 - 174 MHz, 400 - 480 MHz
TX: 136 - 174 MHz (Asian version)
144 - 146 MHz (European version)
144 - 148 MHz (USA version)
400 - 480 MHz (Asian version)
430 - 440 MHz (European version)
430 - 450 MHz (USA version)
FM Broadcast: 65 - 108 MHz
Channel Steps : 5/10/12.5/15/20/25/50/100 kHz
Mode of Emission : F2D, F3E, F2A
Frequency Stability : ±2.5 ppm (−
20
°C to +
60
°C [−
4
°F to +
140
°F])
Antenna Impedance : 50 ohms
Supply Voltage : Nominal: 7.4 V DC, Negative Ground SBR-28LI
Current Consumption :
(Approx.)
190 mA (Receive, 200 mW Audio Output)
95 mA (Standby, Saver Off)
23 mA (Standby, Saver On)
5 mA (Auto Power Off)
1.5 A (5 W TX , 144 MHz) 7.4 V DC
1.7 A (5 W TX , 430 MHz) 7.4 V DC
Operating Temperature : –
4
°F to +
140
°F (–
20
°C to +
60
°C)
Case Size : 2.0” (W) x 3.5” (H) x 1.2” (D) (52×90×30mm)
(
W/O knob and antenna
)
Weight (Approx.) : 8.82 oz (250 g) with SBR-28LI and antenna
● Transmitter
RF Power Output : 5.0 W (High) / 2.5 W (Middle) / 0.5 W (Low)
(@ 7.4 V with SBR-28LI)
Modulation Type : Variable Reactance
Maximum Deviation : ±5.0 kHz
Spurious Emission : USA/Asian version
At least 60 dB below (@TX Power High, Middle)
At least 50 dB below (@TX Power Low)
European version
At least 60 dB below (@TX Power High, Middle)
At least 55 dB below (@TX Power Low)
Microphone Impedance
:
(Approx.)
2 kΩ
To Next Page
Loading...
Need help?
General
