28
No.
Set Mode
item
Description
Selectable options
(Options in bold are the
default settings)
28 RF SQL Adjusts the RF Squelch threshold level.
OFF / S-1 / S-2 / S-3 / S-4
/S-5 / S-6 / S-8 / S-FULL
29 RPT.ARS Turns the ARS function on/off. ARS.ON / ARS.OFF
30 RPT.FRQ Sets the repeater shift width.
OFF / 0.025MHz
−
99.975MHz
31 RPT.SFT Sets the repeater shift direction. SIMPLX / +RPT / -RPT
32 RXSAVE
Selects the Receive mode Battery Saver
interval (“sleep” ratio)
200 MS − 2 SEC / OFF
33 SCN.LMP Turns
the scan lamp ON/OFF while paused.
ON / OFF
34 SCN.RSM Configures the scan stop mode settings. BUSY / HOLD / TIME
35 SKIP
Turns the Memory Scan “Skip” channel
selection mode ON/OFF.
OFF / SKIP
36 SQL.TYP
Selects the Tone Encoder and/or Decoder
mode.
OFF / R-TONE / T-TONE
/ TSQL / REV TN / DCS /
PAGER
37 STEP Sets the frequency steps.
AUTO /5.0 / 10.0 / 12.5 /
15.0 / 20.0 / 25.0 / 50.0 /
100.0 k
38 TN FRQ Sets the TONE frequency.
OFF / 67.0 R
−
100.0 R
−
254.1 R
OFF / 67.0 T
−
100.0 T
−
254.1 T
39 TOT Sets the timeout timer.
OFF / 1MIN − 3MIN −
30MIN
40 TX PWR Selects Transmitter Power
HIGH (5W) / MID (2.5W) /
LOW (0.5W)
41 TX SAVE Turns the Transmit Battery Saver ON/OFF. SAVOFF / SAV ON
42 VFO.SPL Turns the “VFO Split” operation ON/OFF. VSP.OFF / VSP. ON
43 VOX Turns the VOX function ON/OFF. VOXOFF/ VOX ON
44 WFM.RCV
Broadband FM Radio (WFM) function
Enables/Disables.
WFM.ON / WFM.OFF
45 W/N.DEV
Sets the Transmit Modulation Level in the
FM mode.
WIDE / NARROW
46 WX ALT Turns the Weather Alert Scan ON/OFF. ALT.OFF / ALT. ON
(*): This function displays depending on the transceiver version.
To Next Page
Loading...
Need help?
General
