Yamaha 03D - Page 138

136 Chapter 13—Onboard Effects
03D—Owner’s Manual
REV->SYMPHO.
REV->PAN
1. L<->R, L-->R, L<--R, Turn L, Turn R
Parameter Range Description
REV.TIME 0.3–99.0 s Length of reverb.
INI.DLY 0.1–500.0 ms
Delay time until the early reflections of the reverb are
heard.
HI.RATIO 0.1–1.0
Length of the high frequency portion of the reverb,
expressed as a ratio relative to REV.TIME.
DIFF. 0–10 Left/right spread of the reverb sound.
DENSITY 0–100% Density of the reverb.
HPF
THRU,21 Hz–8.0
kHz
Cutoff frequency of the high pass filter.
LPF
50 Hz–16.0 kHz,
THRU
Cutoff frequency of the low pass filter.
REV.BAL 0–100%
Balance of reverb and symphonic-processed reverb. 100 is
only reverb.
FREQ. 0.05 Hz–40.00 Hz Modulation speed.
DEPTH 0–100% Modulation depth.
MOD.DLY 0.0–500.0 ms
Delay time from the direct sound until the modulated
sound.
WAVE SINE, TRI Modulation waveform. SINE: sine wave, TRI: triangle wave
Parameter Range Description
REV.TIME 0.3–99.0 s Length of reverb.
INI.DLY 0.1–500.0 ms
Delay time until the early reflections of the reverb are
heard.
HI.RATIO 0.1–1.0
Length of the high frequency portion of the reverb,
expressed as a ratio relative to REV.TIME.
DIFF. 0–10 Left/right spread of the reverb sound.
DENSITY 0–100% Density of the reverb.
HPF
THRU,21 Hz–8.0
kHz
Cutoff frequency of the high pass filter.
LPF
50 Hz–16.0 kHz,
THRU
Cutoff frequency of the low pass filter.
REV.BAL 0–100%
Balance of reverb and symphonic-processed reverb. 100 is
only reverb.
FREQ. 0.05–40.00 Hz Modulation speed.
DEPTH 0–100% Modulation depth.
DIR.
1
Select the direction in which the sound will move.
WAVE SINE, TRI Modulation waveform. SINE: sine wave, TRI: triangle wave