Operation
46
2. Push the tilt lock lever down to the re-
lease position.
3. Slightly tilt the outboard motor up and
pull the shallow water lever toward the
transom.
4. To return the outboard motor to the nor-
mal position, place the remote control le-
ver / gear shift lever in neutral, then
slightly tilt the outboard motor up. Push
the shallow water lever down. Set the tilt
lock lever to the lock position and slowly
tilt the outboard motor down.
EMU28195
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter.
Cruising in muddy, turbid, or acidic water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(see page 13) if you use the outboard motor
in acidic water or water with a lot of sediment
in it, such as muddy or turbid (cloudy) water.
After operating in such water, flush the cool-
ing passages with fresh water to prevent cor-
rosion. Also rinse the outside of the outboard
motor with fresh water.
69R-9-2A-1E0.book 46 ページ ２０１０年２月３日 水曜日 午後５時１８分
To Next Page
Loading...
Need help?
General
