– 26 –
Item Routine
Pre-
operation
check
Every
6 months
or 100 Hr
12 months
or 300 Hr
Cylinder head
• Decarbonize cylinder head.
• More frequently if necessary.
After every 500 Hrs.
Valve clearance • Check and adjust valve clearance.
Idle speed • Check and adjust idle speed.
Recoil starter • Check recoil starter for damage.
Fittings/fasteners
• Check all fittings and fasteners.
• Correct if necessary.
The point where abnormality was recognized by use.
1
*1····· Initial replacement of the engine oil is after one month or 20 hours of operation.
*2····· The air filter element needs to be cleaned more frequently when using in unusually wet or
dusty areas.
····· Since these items require special tools, data and technical skills, have a Yamaha dealer per-
form the service.
7P5-F8199-U0-E0.indd 26 2014/05/21 9:13:47
To Next Page
Loading...
