Yamaha LB50IIAC - Page 45

b. Autolube tank
Always check Autolube tank oil level
before
operating machine.
1) Raise seat.
2) Remove
filler cap and top off tank.
2. Transmission
a. To check level, start the engine and let it
run for several minutes to warm and dis-
tribute oil. Unscrew the level gauge and
wipe clean. Set it on the case threads
(do not screw in). Remove the level
gauge and check level.
NOTE:------------
Be sure the machine is level and on both
wheels.
b. The stick has Minimum and Maximum
marks. The oil level should be between
the two. Top off as required.
Recommended oil:
SAE 10W/30
type "SE" motor oil
c. To change transmission oil, remove the
drain plug which is located on the bot-
tom ot the crankcase.
With the engine warm, remove the plug
and drain oil. Re-install
plug and add
fresh oil.
Transmission drain plug torque:
20 Nm (2,0 m • kg)
Transmission oil quantity:
650 cc
-40-