CHAPTER
3.
ENGINE
OVERHAUL
REMOVAL
Preparation
for removal
1.
All
dirt,
mud,
dust. and foreign material
should be
thoroughly
removed
from
the
exterior
of
the engine before removal
and disassembly. This
will
prevent
any
harmful
foreign material
from
entering
the
interior
of
the engine assembly.
2. Before engine removal and disassembly,
be sure you have proper
tools
and clea-
ning
equipment
so you can perform a
clean and
efficient
job.
3.
During
disassembly
of
the engine, clean
and place all parts in trays in
order
of
disassembly. This
will
ease and speed
assembly
time
and
insure
correct
re-installation
of
all engine parts.
4.
Start
the
engine and
warm
it
for
a
few
minutes;
turn
off
and drain transmission
oil.
5.
Remove exhaust pipe ring nut.
6. Remove spark plug cap.
7. Remove panel cover and
front
cover.
-50-
To Next Page