Yamaha LB50IIAC - Crankshaft Assembly; Inspection and Repairing; Cylinder Head

Crankshaft assembly
Remove crankshaft assembly with the
crankcase separating tool.
INSPECTION AND REPAIRING
Cylinder head
1. Remove spark plug.
2.
Using a rounded scraper, remove carbon
deposits from combustion chamber.
Take care
to avoid damaging the spark
plug threads. Do not use a sharp
instrument; avoid scratching aluminium.
3. Place on a surface plate. There should
be
no warpage. Correct by re-surfacing
as
follows:
Place 400 - 600 grit wet sandpaper
on surface plate and re-surface head
using a
figure-eight sanding pattern.
Rotate head several
times to avoid
removing too much material from one
side.
-58-