Yamaha MD4 - Tempo Map Storage and Retrieval; Saving a Tempo Map; Loading a Tempo Map

Using MIDI Clock 55
MD4—Owner’s Manual
Saving a Tempo Map
1. Press the [UTILITY] button and use the [√] and [®] SELECT buttons to select
the MIDI Sync function.
2. Press the [ENTER] button.
The display shows OFFXMTCXCLK
3. Use the [√] and [®] SELECT buttons to select CLK.
4. Press the [ENTER] button.
The display shows MeterXTempo>
5. Press the [®] SELECT button twice.
The display shows <XSaveXLoad
6. Press the [ENTER] button.
The display shows SaveXEXE?
7. Press the [ENTER] button to save the Tempo Map or the [CLEAR] button to
cancel.
The Tempo Map is saved to disc.
The disc area that is used to store Tempo Map data can hold several Tempo Maps that use all
26 steps. If not all steps in a Tempo Map can be saved, the message
SaveWarn! appears.
Loading a Tempo Map
1. Press the [UTILITY] button and use the [√] and [®] SELECT buttons to select
the MIDI Sync function.
2. Press the [ENTER] button.
The display shows OFFXMTCXCLK
3. Use the [√] and [®] SELECT buttons to select CLK.
4. Press the [ENTER] button.
The display shows MeterXTempo>
5. Press the [®] SELECT button three times.
The display shows <XSaveXLoad
6. Press the [ENTER] button.
The display shows LoadXEXE?
7. Press the [ENTER] button to load the Tempo Map or the [CLEAR] button to
cancel.
The Tempo Map is loaded and MASTER appears on the display.
MD4 is now ready for synchronized MIDI Clock operation.