49
P-85/P-85S
4. PROGRAM CHANGE 7. SYSTEM EXCLUSIVE MESSAGES
Data format: [CnH] -> [ppH]
(Universal System Exclusive)
CnH = Program event (n = channel number)
ppH = Program change number
(1) Universal Realtime Message
P.C.#=Program Change number Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[llH] -> [mmH] -> [F7H]
Grand Piano 1
MIDI Master Volume
lsuoenatlumiS•2onaiPdnarG y changes the volume of all channels.
assememulovretsamIDIManehW•1onaiP.E ge is received, the
lnoemulov2onaiP.E
y has affect on the MIDI receive channel, not the
C. Organ 1 panel master volume.
C. Or
g sutatsev
isulcxE=H0F2na
String emitlaeRlasrevinU=HF7s
Harp ratfoDI=HF71drohcis get device
Har
p asseMlortnoCeciveD=1#DI-buS=H402drohcis ge
Vibrap
emuloVretsaM=2#DI-buS=H10enoh
llH = Volume LSB
• When program change reception is turned OFF, no program mmH =Volume MSB
chang evisulcxEfodnE=H7F.deviecerrodettimsnartsiatade
•When
you specify a program change as a number in the
or
range of 0–127, specify a number that is one less than the F0H = Exclusive status
program change number listed above. For example, to specify 7FH = Universal Realtime
program change number 1, you would specify a value of 0. XnH = When received, n=0–F.
X = irrelevant
5. Pitch Bend Chan
ge (reception only)
04H = Sub-ID #1=Device Control Message
[EnH] -> [ccH] -> [ddH] 01H = Sub-ID #2=Master Volume
BSLemuloV=H
llBSL=Hcc
HmmBSM=Hdd =Volume MSB
F7H = End of Exclusive
6. SYSTEM REALTIME MESSAGES
F8H: Timin
g clock
(2) Universal Non-Realtime Message (GM On)
FAH: Start
General MIDI Mode On
FCH: Stop Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->
FEH: Active sensing [F7H]
F0H = Exclusive status
Transmitted ever
y Received as 96-clock tempo timing 7EH = Universal Non-Realtime
96 clocks when MIDI clock is set to External. 7FH = ID of target device
Song start Song asseMIDIMlareneG=1#DI-buS=H90trats ge
Not received when the MIDI clock 01H = Sub-ID #2=General MIDI On
evisulcxEfodnE=H7F.lanretnIotte
ssi
Song stop Song stop
or
Not received when the MIDI clock F0H = Exclusive status
emitlaeR-noNlasrevinU=HE7.lanretnIottessi
Transmitted ever
y If a signal is not received via MIDI XnH = When received, n=0–F.
200 milliseconds for more than 400 milliseconds
, the X = irrelevant
same processing will take place for 09H = Sub-ID #1=General MIDI Message
All Sound Off, All Notes Off and 01H = Sub-ID #2=General MIDI On
Reset All Controllers as when those F7H = End of Exclusive
si
gnals are received.
When the General MIDI mode ON messa
ge is received, the
• If an error occurs during MIDI reception, the Sustain, MIDI system will be reset to its default settings.
Sostenuto, and Soft effects for all channels are turned off and This message requires approximately 50ms to execute, so
assemtxenehterofebdewollaebdluohsemittnei
ciffus.sruccoffOetoNllAna ge
is sent.
Voice Name MSB LSB P.C.#
01221
01121
01226
01225
012320
012220
012249
01227
Data Transmission
0 123
Reception
7
012212
FEH
FCH
FAH
F8H
To Next Page
Loading...
