Periodic maintenance and adjustment
62
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU14230
Recommended equipment
It is good practice to carry the spare parts and
other necessary equipment with you while
riding the snowmobile so that minor repairs
can be done if necessary. The following
should be carried at all times:
● Flashlight
● Roll of plastic tape
● Steel wire
● Tow rope
● V-belt
● Light bulbs
When you start out for a long distance trip, ex-
tra fuel should be carried as well.
ESU14143
Removing and installing the
shroud and covers (RS90P /
RS90PLT / RST90PGT)
EWS00091
Be sure shroud and covers are secured
before operation. A loose shroud or cover
could move and cause loss of control.
Shroud
To remove the shroud
Loosen the fasteners, slowly raise the shroud,
and then unhook the shroud from the shroud
stay.
To install the shroud
Hook the end of the shroud onto the shroud
stay, slowly lower it to the original position,
and then tighten the fasteners.
1. Hexagon wrench cover
2. Hexagon wrench
3. Tool kit
4. Strap
1. Fastener
2. Shroud
3. Shroud stay
U8HV11E0.book Page 62 Monday, April 23, 2012 9:34 AM
To Next Page
Loading...
