Yamaha RX-V4ABL - Playback of Music Using Bluetooth Speakers;Headphones

Playback of music using Bluetooth® speakers/headphones
You can enjoy audio played back on the unit using Bluetooth speakers/headphones.
Be sure to connect the Bluetooth speakers/headphones whose volume is adjustable. You cannot adjust the
volume of the Bluetooth speakers/headphones from the unit.
Bluetooth speakers/headphones
The unit
1 Select an input source other than “Bluetooth”.
2 Press SETUP.
3 Set “Transmitter” in “Bluetooth” in the “Setup” menu to “On”.
4 Select the Bluetooth speakers/headphones in “Device Search” in the “Setup”
menu.
When the connection process finishes, “Completed” appears and audio played back on the
unit will be reproduced from the Bluetooth speakers/headphones.
NOTE
(
Use the Bluetooth speakers/headphones to adjust their volume.
(
Sounds will be also output from the speakers connected to the unit.
(
AirPlay and DSD audio cannot be delivered.
(
You cannot use the Bluetooth audio transmitter function and the Bluetooth audio receiver function at the same time.
(
If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing mode and then perform “Device
Search” operation again.
(
To terminate the Bluetooth connection, perform one of the following operations.
(
Perform the disconnect operation on the Bluetooth speakers/headphones.
(
Set “Transmitter” in “Bluetooth” in the “Setup” menu to “Off”.
(
The Bluetooth indicator on the front display lights up while the unit is connected to a Bluetooth device.
Indicator
Related links
(
“Setting the use of Bluetooth®”(p.221)
(
“Setting the use of audio transmission to a Bluetooth® device”(p.224)
(
“Connecting the unit to a Bluetooth® device that receives transmitted audio”(p.225)
110
PLAYBACK > Playing back music with the Bluetooth® connection