Yamaha RX-V4ABL - Adjusting the Volume for Zone Separately

Adjusting the volume for zone separately
Even though the volume for Zone B is automatically adjusted according to the volume for Zone A at the
factory, you can separately adjust the volume for Zone B with the following procedure.
1 Press SETUP.
2 Select “Sound”.
3 Select “Volume”.
4 Select “ZoneB Volume”.
5 Select “Async.”.
6 Press SETUP.
7 Slide the Zone switch to “ZONE B”.
8 Press VOLUME to adjust the volume for Zone B.
NOTE
(
Slide the Zone switch to “ZONE A” in menu operations.
(
When “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB.
(
To mute the audio output to Zone B, press MUTE. Press MUTE again to unmute.
128
ENJOYING IN MULTIPLE ROOMS (ZONES) > Operating zones