Setting the crossover frequency of the low-frequency components
Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to
“Small”.
A frequency sound lower than the specified value will be produced from the subwoofer or front speakers.
Setup menu
“Speaker” > “Configuration” > “Crossover”
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
NOTE
When the volume and crossover frequency are adjustable on your subwoofer, set your subwoofer as follows.
(
The volume is set to half.
(
The crossover frequency is set to maximum.
Related links
(
“Setting the use of each speaker and its size”(p.163)
(
“Basic operation of the Setup menu”(p.151)
164
CONFIGURATIONS > Configuring various functions (Setup menu)
To Next Page
