f
SELECT/ENTER
Selects the input source and operates the front display.
g
Standby indicator
Lights up when the unit is in standby mode under any of the following conditions.
(
HDMI Control is enabled (p.173)
(
Standby Through is enabled (p.175)
(
Network Standby is enabled (p.218)
(
Bluetooth Standby is enabled (p.223)
h
USB jack
For connecting a USB flash device (p.112).
i
YPAO jack
For connecting the supplied YPAO microphone (p.73).
j
PHONES jack
For connecting headphones.
k
Touch panel
For operation by a touch. The operation sound rings.
SCENE
Switches with one touch between multiple settings set using the SCENE function. Also, turns on the unit when it is in
standby mode (p.118).
RETURN
Operates the “Front Display” menu.
MENU (CONNECT)
Operates the “Front Display” menu.
Enters the MusicCast network addition and the wireless LAN setup by holding down for 5 seconds.
Related links
“Care for the front panel”(p.300)
24
PART NAMES AND FUNCTIONS > Unit body
To Next Page
Loading...
