103
Changing the Effects
The RY20 provides you with 10 different types of effect. You can apply
a different effect to each drum kit. However, any changes you make to
the effect settings for the preset drum kits are temporary. (The preset
drum kits have predefined effect settings)
1
Select the Type display page by pressing the [ PAGE+ ] or [ PAGE– ] button.
The current effect flashes under the “TYPE” prompt.
2
Set the desired type by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
buttons.
The effect types are:
■ Select the Effect Type
Reverb
HALL1 A midsize concert hall.
HALL2 A large concert hall.
ROOM1 A large room.
ROOM2 A small room.
PLAT1 A rapidly attenuating plate reverb.
PLAT2 A rigid plate echo.
Delay
DELY1 A stereo delay with the delay and reverb connected
in parallel.
DELY2 A stereo delay with the delay and reverb connected
in series.
DELY3 A stereo delay with the delay and reverb connected
in parallel. The delay time is synchronized to the
tempo.
DELY4 A stereo delay with the delay and reverb connected
in series. The delay time is synchronized to the
tempo.
PAGE – PAGE +
PATTERN EFFECT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD
To Next Page