71
Recording a Song
2
Select the insert location by stepping through the parts with the [FORWARD]
or [BACKWARD] button.
3
Select a pattern to insert by rotating the Jog Dial or by using the [ +1 ] and
[ –1 ] buttons.
Alternatively, select another section to insert. Press and hold the [SECTION]
button. Then press the drum pad button for the section you want to
record.
4
Press the [ ENTER ] button to insert the part.
5
Press the [ PAGE– ] button to return to Song Record Mode.
NOTE
You can also select this display page by pressing the
[ PAGE+ ] buttons.
NOTE
The new part is inserted BEFORE the current part.
IMPORTANT
If you decide that you DO NOT want to insert a part into the song, you can cancel
this operation by simply selecting another function.
Press the
[ SONG ] button to return to Song Record Mode.
Press the [ PAGE+ ] or [ PAGE– ] buttons to select another display page.
Cancel the recording by pressing the [RECORD] button.
NOTE
The error message “
MEMORY FULL” may appear. For further details, refer to
page 66.
PAGE – PAGE +
ENTER
To Next Page
Loading...
