91
Modifying the Drum Kits
When the level sensitivity is set to a value of “0”, an increase in velocity
will not change the volume.
Pressing the [ +1 ] and [ –1 ] buttons simultaneously resets the level
sensitivity to “3”.
You can use the [ < ] and [ > ] cursor buttons to access the “SENS LVL”,
“DRUM KIT” and “PAD” settings.
Pitch Sensitivity
This parameter controls how much the pitch of a voice will shift as the
velocity with which you tap its drum pad increases.
1
Select the Pitch Sensitivity parameter by pressing the [PAGE+] or [PAGE–]
button. The display reads “SENS” and “PCH”.
2
Press the pad you want to modify after selecting the Pad Bank.
3
Adjust the pitch sensitivity of the pad by rotating the Jog Dial or by using
the [ +1 ] and [ –1 ] buttons.
NOTE
If you have selected the Bass Pad Bank, the level sensitivity setting applies to all the
pads.
–1 +1
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
To Next Page
Loading...
