Yamaha TSX-140 - User Manual

Questions and Answers

W
william43Sep 23, 2025
What does flashing USB indicator mean on Yamaha TSX-140 Stereo System?
- M
  Melissa WalshSep 23, 2025
  If the USB indicator flashes twice and repeats 3 times after connecting a USB device to your Yamaha Stereo System: * An incompatible USB device is connected. Try turning off the system and reconnecting the USB device. If it doesn't work, the USB device is not playable on the unit. * The USB device might not contain playable files. Ensure the USB device contains playable files.
B
benjamingarzaAug 31, 2025
Why isn't my iPod charging on my Yamaha Stereo System?
- G
  Gregory AlexanderAug 31, 2025
  If your iPod isn't charging on your Yamaha Stereo System, first, remove the iPod and set it in the iPod dock again. Second, check if the system is set to power save mode and, if so, press to cancel it.
D
David MeyerAug 25, 2025
Why is the sound cracked or distorted on my Yamaha Stereo System?
- C
  Chase HullAug 25, 2025
  Cracked, distorted sound, or abnormal noise from your Yamaha Stereo System can occur if the input source volume or the unit's volume (especially Bass) is too high. Adjust the volume using the VOLUME control, or adjust the Bass using the EQ.
T
Tracy Moore MDAug 25, 2025
Why do Yamaha TSX-140 speakers make no sound?
- P
  patriciawrightAug 26, 2025
  There are several reasons why your Yamaha Stereo System speakers might not be producing sound: * The volume could be set to the minimum level. If so, adjust the volume. * The source selected might be incorrect. Make sure you've selected the correct source. * Headphones might be connected. If they are, remove them.
M
Miguel HaleyAug 26, 2025
What to do if Yamaha TSX-140 sound suddenly turns off?
- N
  Nichole BrooksAug 26, 2025
  If the sound on your Yamaha Stereo System suddenly turns off, it might be because the sleep function is activated. To resolve this, turn on the system and play the source again.
L
Lauren TaylorAug 27, 2025
Why does my Yamaha TSX-140 have too much noise during stereo broadcast?
- G
  gfergusonAug 27, 2025
  Excessive noise during stereo broadcast on your Yamaha Stereo System may be due to an improperly connected antenna. Ensure the antenna is connected correctly. Alternatively, the radio station might be too far away or the radio wave reception is weak in your area. Try manual tuning to improve the signal or use a multi-channel outdoor antenna.
D
Dr. Denise WatsonAug 27, 2025
What to do if my Yamaha Stereo System does not operate properly?
- J
  jonathan89Aug 27, 2025
  If your Yamaha Stereo System isn't operating correctly, it might have experienced a strong electrical shock or a drop in power supply. Turn the system off, disconnect the power cable, wait about 30 seconds, reconnect the power cable, and then turn the system back on.
B
Brendan ThompsonAug 28, 2025
Why does my Yamaha Stereo System make noises with digital equipment?
- A
  Ashley LiAug 28, 2025
  If your Yamaha Stereo System is producing noises when near digital or high-frequency equipment, it may be placed too close to the equipment. Try placing the unit farther away.
W
William MartinAug 29, 2025
Why won't my iPod play at the alarm time on my Yamaha TSX-140 Stereo System?
- E
  ewilliamsAug 29, 2025
  If your iPod isn't playing back at the alarm time on your Yamaha Stereo System, ensure that the iPod is properly set in the iPod dock. Also, check that the ALARM TYPE is set to SOURCE+BEEP or SOURCE, and not just BEEP.
M
Michael AustinAug 29, 2025
Why is the clock flashing on my Yamaha TSX-140 Stereo System?
- T
  Timothy PayneAug 29, 2025
  If the clock is flashing and the unit cannot be operated on your Yamaha Stereo System, the CLOCK on the rear panel might be set to SET, indicating it's in clock setting mode. Set CLOCK to LOCK.

Yamaha TSX-140 Specifications

General

CD player	Yes
Dimensions (WxDxH)	400 x 136 x 181 mm
USB connector type	Mini-USB B
Bluetooth	No
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1
Product color	Red
Volume control	Rotary
Frequency range	- Hz
RMS rated power	30 W
Audio output channels	2.0 channels
Supported radio bands	AM, FM
Preset stations quantity	5
Equalizer	-
Apple docking compatibility	iPhone, iPod