Why is there no sound from my iPod on Yamaha TSX-140 Stereo System?
If there's no sound from your iPod on your Yamaha Stereo System, make sure the iPod is firmly set in the iPod dock. Also, check if earphones are connected and remove them. Finally, ensure that your iPod software is updated to the latest version via iTunes.
What to do if my Yamaha TSX-140 Stereo System sound suddenly turns off?
If the sound on your Yamaha Stereo System suddenly turns off, the sleep timer may be activated. Turn on the system and play the source again.
What does it mean when the iPod indicator flashes on my Yamaha Stereo System?
If the iPod indicator flashes twice repeatedly after connecting your iPod to the Yamaha Stereo System, it means that the iPod being used is not supported by the unit. Use a supported iPod.
Why can't I sync with iTunes using my Yamaha TSX-140?
If you're unable to sync with iTunes using your Yamaha Stereo System, the signal damping may be increased due to the PC or USB cable. Try using a shorter USB 2.0 cable.
Why can't I insert a disc into my Yamaha TSX-140 Stereo System?
If you can't insert a disc into your Yamaha Stereo System, the system might be in power save mode. Press to cancel the power save mode.
Why do some buttons not work on my Yamaha TSX-140?
If some buttons aren't working on your Yamaha Stereo System, the disc loaded may not be compatible. Use a disc supported by the unit.
Why does playback not start immediately on my Yamaha TSX-140?
If playback doesn't start immediately after pressing play on your Yamaha Stereo System, the disc may be dirty; wipe it clean. The disc loaded may not be compatible, so use a supported disc. If the unit was moved from a cold to warm place, condensation may have formed on the disc reading lens; wait an hour or two until the unit adjusts to the room temperature, and try again.
Why does my Yamaha TSX-140 unload the disc?
If the CD indicator flashes repeatedly and the disc is unloaded on your Yamaha Stereo System, the disc loaded may not be compatible; use a supported disc. The disc may be dirty, so wipe it clean. Ensure the disc is inserted with the label side facing up. Also, the disc may not contain playable files; use a disc with playable files.
What does “Err” mean on my Yamaha TSX-140 Stereo System display?
If “Err” is displayed on the front panel of your Yamaha Stereo System after loading a disc, it indicates an error in the unit. Unload the disc.
Why won't my Yamaha TSX-140 play MP3/WMA files?
If MP3/WMA files on your USB device won't play on your Yamaha Stereo System, the USB device may not be recognized. Turn off the system and reconnect the USB device. If the device came with an AC adapter, connect it. If these steps don't work, the USB device may not be playable on the unit.
General| CD player | Yes |
|---|---|
| Dimensions (WxDxH) | 400 x 136 x 181 mm |
| USB connector type | Mini-USB B |
| Bluetooth | No |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Product color | Red |
| Volume control | Rotary |
| Frequency range | - Hz |
| RMS rated power | 30 W |
| Audio output channels | 2.0 channels |
| Supported radio bands | AM, FM |
| Preset stations quantity | 5 |
| Equalizer | - |
| Apple docking compatibility | iPhone, iPod |
Weight and Dimensions| Weight | 3200 g |
|---|
Essential safety guidelines and laser radiation warnings for unit operation.
Critical cautions and guidelines for safe and proper unit operation.
Step-by-step guide to setting the unit's clock.
Identification and function of controls on the top panel.
Setting up and using the alarm function with various sources.
Solutions for common unit issues and iPod playback problems.
Troubleshooting disc playback, USB device, and FM radio reception.
To Next Page
