EasyManua.ls Logo

Yamaha WR450F 2021 - Checking the Cylinder Head Breather Hose; Checking the Fuel Line; Checking the Throttle Body Joint

Yamaha WR450F 2021
402 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGINE
3-18
8. Turn the plates “1” to the original position.
9. Install:
• Air filter case cover “1”
• Fuel tank breather hose
(to the air filter case cover)
TIP
• Make sure that the two slots “a” at the rear side
of the vehicle in the air filter case cover are se-
curely fitted into the two edges “b” on the air fil-
ter case.
• Be sure to carefully align the two ribs “c” locat-
ed on the left and right sides of the air filter
case cover with the projections “d” on the air
scoop, and then install the air filter case cover.
10.Install:
• Fuel tank cap cover
EAM30335
CHECKING THE THROTTLE BODY JOINT
1. Check:
• Throttle body joint “1”
Crack/damage Replace.
EAM30222
CHECKING THE FUEL LINE
1. Remove:
• Seat
• Side cover (left/right)
• Air scoop (left/right)
Refer to “GENERAL CHASSIS” on page 4-1.
• Fuel tank
Refer to “FUEL TANK” on page 7-1.
2. Check:
• Fuel hose “1”
Crack/damage Replace.
Loose connection Connect properly.
3. Install:
• Fuel tank
Refer to “FUEL TANK” on page 7-1.
• Air scoop (left/right)
• Seat
• Side cover (left/right)
Refer to “GENERAL CHASSIS” on page 4-1.
EAM30476
CHECKING THE CYLINDER HEAD
BREATHER HOSE
1. Check:
• Breather hose “1”
Crack/damage Replace.
Loose connection Connect properly.
NOTICE
ECA14920
Make sure the cylinder head breather hose is
routed correctly.
1
1
a
b
1
1
c
d
1
1

Table of Contents