MULTI-FUNCTION DISPLAY
1-31
A. A short push on the button changes the oper-
ation in the arrowed direction.
B. A short push on the button changes the oper-
ation in both arrowed directions.
C. A long push on the button changes the oper-
ation in the arrowed direction.
D. A long push on the button changes the oper-
ation in both arrowed directions.
E. Meter function
F. Extent to which the meter can operate
1. Odometer
2. ODO
3. TRIP A
4. TRIP B
5. Clock
6. Timer
7. Accumulated fuel consumption
8. Speedometer
9. Speed
10.SETTING MODE
11.Setting the backlight brightness
12.Setting the clock time (hour)
13.Setting the clock time (minute)
14.Setting the unit
15.Setting the fuel consumption correction
16.Setting the tire diameter correction
17.A button
18.B button
19.Turn on the display with the A button pushed.
After the display is turned on, release the A
button when shifted to the setting mode.
20.Setting the timer
21.Putting measurement on standby
22.Auto start
23.Manual start
24.A button + B button
25.Measurement starts as the machine moves
26.Timer in operation
27.Timer not in operation
28.Reset timer
To Next Page
Loading...
