CONTENTS
Safety instructions ⅰ－ⅵ
1. Name of each part 1
2. Installation 2
2.1 Table cutting diagram 2
2.1.1 Table top type (Type A: standard) 2
2.1.2 Table top type (Type B) 3
2.1.3 Semi-submerged type 4
2.2 Installing the table top type 5
2.3 Installing the semi-submerged type 5
2.4 Pulley and belt 6
2.5 Hanging the belt 7
2.6 Belt cover 7
2.7 Eye guard and nger guard 8
2.8 Thread guide plate 8
3.
Sewing speed and rotating direction of the pulley
9
4. Lubrication 10
4.1 Lubricating oil 10
4.2 Lubricating 10
4.3 Changing oil 11
4.4 Checking and replacing the oil lter 11
5. Proper operation 12
5.1 Needle system 12
5.2 Installing the needles 12
5.3 Threading 13
5.4 Adjusting the thread tension 15
5.5 Pressure of the presser foot 15
5.6 Adjusting the position of the presser foot 15
5.7 Adjusting the movement of the differential feed dog 16
5.8 Adjusting the stitch length 17
5.9 Adjusting the fabric guide (VE2713-8F) 18
5.10 Pressure of the walking presser foot (VE2711-8F-WF1) 19
5.11 Adjusting the fabric edge guide (VE2711-8, -8F, VE2740PR-8F) 19
To Next Page
Loading...
Need help?
General
