ENGINE OPERATION
48 YM Series Operation Manual
CHECKING THE ENGINE
AFTER OPERATION
• Check that the power switch is off and
that the battery switch (if equipped) is
turned to off.
• Fill the fuel tank. See Filling the Fuel
Tank on page 29.
• Close seawater cock(s).
• If there is a risk of freezing, check that
the cooling system contains enough
coolant. See Engine Coolant
Specifications on page 34.
• If there is a risk of freezing, drain the
seawater system. See Drain Seawater
Cooling System on page 80.
• At temperatures below 0°C (32°F), drain
seawater system and connect the
engine heater (if equipped).
YM OPM_EN.book 48 ページ ２０１３年６月７日 金曜日 午前１１時１１分
To Next Page
Loading...
