EasyManuals Logo

Yaohua Weighing System XK3190-A23p User Manual

Yaohua Weighing System XK3190-A23p
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
X K 3 1 9 0 A23p
(26)
6. Err 18 Keypad is broken, and back to weighing state 10 seconds later.
7. Err 22 Clock is broken
8. Err 23 Memory is broken
9. Add Accumulate count, back to weighing state 3 seconds later
automatically.
10. totAL Accumulate display, back to weighing state 3 seconds later
automatically.
Chapter 8 Maintenance and attention
1.To guarantee its clarity and service life, the indicator shouldn’t be placed directly under
sunshine and should be set in the plain space.
2.It is not suitable to place the indicator in the dusty and vibration environment and also
avoid using in the moist environment.
3.Signal source and weighing indicator should be reliably connected, and system should
be well grounding. It should be far away with strong electric field, strong magnetic field.
Load cell and indicator should be far away with strong corrosive, inflammable, explosive
object.
Do not use under inflammable gas or inflammable steam; do not use under
pressure container canning system.
Lightning frequent areas, it must be installed reliable lightning arrester, to ensure
operators safety and prevent damage of instruments and relevant equipment due to
lightning.
Signal source and indicator are static sensitive equipments, when using must
earnestly adopt anti-static measure. It is prohibited in measuring device for welding
operation or other strong electric field operation; in thunderstorms season, we must
implement the reliable lightning-protection measures to prevent signal source and
the indicator damage caused by lightning strike, ensure operators safety of weighing
equipment and related equipment safety operation.
4. Never use strong solvents (e.g., benzene, nitro class oil) to clean the housing.
5. Liquid or electricity conducting particles should not be poured into the indicator, in case
the indicator damage and electric shock.
6. You should cut off power supply of indicator and relevant device before you pull-in and
out the connecting cable of indicator and external device.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yaohua Weighing System XK3190-A23p and is the answer not in the manual?

Yaohua Weighing System XK3190-A23p Specifications

General IconGeneral
BrandYaohua Weighing System
ModelXK3190-A23p
CategoryAccessories
LanguageEnglish

Related product manuals