X K 3 1 9 0 –A23p
(7)
zero and tare indicate symbol light is on.
Cancel tare
If the gross weight is zero or below zero and in the tare state also in weighing state,
press【tare】can put the current gross weight to zero and the tare indicate symbol light
is off.
(6) Unit price input
1 Input
Press 0-9 number button in weighing stare can input the unit price.
Enter the unit price, the key is not more than 2 seconds interval, otherwise the meter
will automatically be cleared and re-start inputting. The unit price is "rmb/ kg", fixed to
two decimal places.
1 clear
Method 1：press“clear/paper”button，unit price clear to zero
Method 2：2 seconds after unit price input，press“0”button，unit price clear to zero
(7) Accumulate calculate, accumulate display and accumulate clear
1. Accumulate calculate
When the amount is above zero and is stable, press 【Accumulate calculate】
button , you can accumulate the total amount of the current amount, the cumulative
number of times plus one, the cumulative indicate light is on.
Indicator display【Add 】 （Accumulated reminder, 3 seconds to return
to weighing mode automatically ）
【n ** 】 （Accumulated times，up to 99 times）
【 ***.** 】 （Accumulated amount，up to 9999.99 RMB）
After one time accumulated，you must return to the below 50% of cumulative
weight or re-input the unit price to the next cumulative .
2. Accumulative display
When the amount is zero, press “accumulate calculate”button, you can check the
current accumulate times and amount .
Indicator display【totAL 】 （Accumulate display reminder，press any
key to back into the weighing state）
【n ** 】 （Accumulate times）
【 ***.** 】 （Accumulate amount）
3. Accumulate clear
When indicator accumulate calculate（accumulate indicate symbol light is on），press
“accumulate clear”button can clear accumulate amount and accumulate times to
To Next Page
Loading...
Need help?
General
