X K 3 1 9 0 –A23p
(16)
Chapter 5 Print Function
Indicator can select internal dot matrix printer or external printer LQ300+. External
printer connect with the indicator through serial port connection line ,and also occupy
the serial port.
Note: when choose the external printer , the indicator communication function is
forbidden. （It need modification when connect to the external printer ）
1、Auto print during accumulation ：
Auto print during accumulation is selectable, corresponding parameter is“AddP”，
details setting , please check the following print setting.
Auto print when accumulation is selected（AddP=1），press【accumulation】button，
it will print current details automatically after accumulation is finished successfully.
Details print format can be selected；
Press【accumulation clear】button can clear accumulate times and amount, and print
the current accumulation amount in the same time.
2、Print accumulation details：
Press【print】button when the accumulation indicate light is on，it will print the current
all the accumulation details and amount; print format can not be selected and it’s
fixed as the record format.
3、Weight print：
Weight print is workable when the accumulation indicate light is off.
1、Auto print：“Auto”parameter is 1，when the weight is bigger than the auto print
lower limit and stable, it will auto print and save the current information.
2、Manual print：press【print】button when accumulation indicate light is off and stable,
and print the current information.
3、Press【accumulate clear】button after one group weight print finished, and print the
accumulation net weight .
4、Print during checking：
Press【print】when display accumulation during the checking, it can print all the
accumulation details .
Press【print】when display details during the checking, it can print current details .
5、Change print：
When change and change amount is not 0, press【print】can print pay off and pay
amount and change.
To Next Page
Loading...
Need help?
General
