X K 3 1 9 0－C 602
C Filter Weak
A little
weak
Mediu
m
A little
strong
Strong
difficult for the stability
indicating lamp to light on
when the weight is less
stable. When the stability
indicating lamp is not on,
zero-setting, tare and printing
operation cannot be carried
out. User can adjust relevant
parameter according to actual
need.
4
[ **]
[Addr ]
Indicator communication address (01 ~
26)
When several indicators communicate
with PC through the RS422/485 bus,
communication addresses can be used to
distinguish them.
Communication baud rate (0 ~7)
A-communication interface (1),
B-communication interface (2)
A,B 0 1 2 3
BPS
600 1200 2400 4800
A,B 4 5 6 —
5
[ AB]
[bAud ]
BPS
9600 19.2k 57.6k
—
Communication mode
A-communication interface (1),
B-communication interface (2)
A 0 1 2
Communicati
on mode
Continuously
send
AD code
Continuously
send weight
Used as
printing
interface
B 0 1 2
6
[ AB]
[t Mode ]
Communicati
on mode
Command
response
mode
Continuous
send mode
RS485mode
The times of sending data per
second by communication
interface (1) equal to the AD
conversion rate.
The sending rate of
communication interface (2)
in continuous send mode is
about 10 times per second.
RS485 mode can only be
used in command response
mode.
Printer model (0 ~ 4)
A 0 1 2 3 4
7
[ A]
[Prn ]
Printer
model
No
printer
Micro
printer
LT800
(9
needle)
Panasoni
c
KX-P
1121
EPSON
1600K
The listed printer model is
the typical one. Printer with
compatible communication
protocol can be used.
To Next Page
Loading...
