VAN-V17001E<1>, Replacing A1000 crane with CR700
16/44
3-4. Terminal Sizes and Wire Gauge
Main Circuit Terminal Sizes and Wire Gauge
* Refer to the CR700 Technical Manual when checking the recommended wire gauge of CR700
and the IP20 applicable gauge.
200 V class Indicates ground terminal
Model
Drive Capacity
A1000: Model
CR700: Catalog
code
Terminal
Symbol
Applicable
Gauge
mm
2
Terminal Screw㻌
Tightening
Torque
N㺃m㻌
Size㻌 Shape㻌
A1000
CIMR-AA2A0004
CIMR-AA2A0006
CIMR-AA2A0008
CIMR-AA2A0010
CIMR-AA2A0012
CIMR-AA2A0018
R/L1,S/L2,T/L3 2 - 5.5
M4
Panhead (+)㻌
1.2 - 1.5
U/T1,V/T2,W/T3㻌 2-5.5㻌
-,+1,+2㻌 2-5.5㻌
B1,B2㻌 2-5.5㻌
肀㻌
2-5.5㻌 +/- screw㻌
CR700
CR70A2003
CR70A2005
CR70A2008
CR70A2011
CR70A2014
R/L1,S/L2,T/L3 2 - 14
M4
Slot (-)㻌
1.5 - 1.7
U/T1,V/T2,W/T3㻌 2-14㻌
-,+1,+2㻌 2-22㻌 M5 2.3 - 2.5
B1,B2㻌 2-5.5㻌 M4 1.5 - 1.7
肀㻌
2-8㻌 M4 +/- screw㻌 1.2 - 1.5
A1000 CIMR-AA2A0021
R/L1,S/L2,T/L3 3.5 - 5.5
M4
Panhead (+)
1.2 - 1.5
U/T1,V/T2,W/T3㻌 3.5 - 5.5㻌
-,+1,+2㻌 3.5 - 5.5㻌
B1,B2㻌 2-5.5㻌
肀㻌
3.5 - 5.5㻌 +/- screw
CR700 CR70A2018
R/L1,S/L2,T/L3 2 - 14
M4
Slot (-)
1.5 - 1.7
U/T1,V/T2,W/T3㻌 2-14㻌
-,+1,+2㻌 2-22㻌 M5 2.3 - 2.5
B1,B2㻌 2-5.5㻌 M4 1.5 - 1.7
肀㻌
3.5 - 8㻌 M4 +/- screw 1.2 - 1.5
A1000 CIMR-AA2A0030
R/L1,S/L2,T/L3 5.5 - 14
M4 Panhead (+) 2.1 - 2.3
U/T1,V/T2,W/T3㻌 5.5 - 14㻌
-,+1,+2㻌 5.5 - 14㻌
B1,B2㻌 2-5.5㻌
肀㻌
5.5 - 8㻌 M5 +/- screw 2.0 - 2.5
CR700 CR70A2025
R/L1,S/L2,T/L3 2 - 14
M4
Slot (-)
1.5 - 1.7
U/T1,V/T2,W/T3㻌 2-14㻌
-,+1,+2㻌 2-22㻌 M5 2.3 - 2.5
B1,B2㻌 2-5.5㻌 M4 1.5 - 1.7
肀㻌
5.5 - 8㻌 M5 +/- screw 2.0 - 2.5
To Next Page
Loading...
Need help?
General
