To Next PageTo Next Page
Need help?Do you have a question about the YASKAWA OYMC V1000 and is the answer not in the manual?
General| Series | V1000 |
|---|---|
| Output Voltage | 3-Phase, matches input voltage |
| Control Method | V/f control |
| Overload Capacity | 150% for 60 seconds |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault, Short Circuit |
| Protection Features | Electronic Thermal Overload Protection |
| Communication Interface | Modbus |
| Frequency Range | 400 Hz |
| Ambient Temperature | -10°C to +40°C |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C |
| Humidity | 95% (non-condensing) |
| Cooling Method | Fan Cooled |
Parameters for initial setup of the drive, including language, access levels, initialization, and password.
Parameters for configuring frequency reference, Run command, braking, timers, PID control, and other settings.
Parameters for acceleration, deceleration, S-curves, slip compensation, torque compensation, and carrier frequency.
Parameters for setting various frequency reference inputs, including upper/lower limits and jump frequencies.
Parameters covering motor-related settings, including V/f characteristics and motor data for optimal control.
Parameters for setting up communication option cards and error detection methods for serial communication.
Parameters used to assign functions to the external terminals for digital inputs and outputs.
Parameters for drive and motor protection, including overload, power loss, stall prevention, and torque limits.
A comprehensive table listing all parameters, their descriptions, ranges, and default settings.
