(2) Monitor Panel Jog Operation Procedure
For speed reference adjustment, use user constant Cn-lO (see Par. 4.1).
The switch functions provided for monitor panel jog operations are indi-
cated in Fig. 4.4.
SWI SW3
SW2 SW4
Fig. 4.4 Switch Functions for Monitor Panel Jog Operations
[] With the [ SVON/OFF [switch, effect SVON/SVOFF changeover.
[] The motor runs in the forward direction while the [ FORWARD Ikey is held
down.
[] The motor runs in the reverse direction while the [ REVERSE Ikey is held
down.
[] The _ key is used to switch from the monitor panel jog operation mode
to the user constant Cn-00 data display status.
[] With the _ key, return to the item No. display status.
[] Using the _ key, switch from the setting mode to the monitor mode.
--11 h
To Next Page
Loading...