YASKAWA Drive-V1000

6 Basic Operation
YASK AWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual 29
■ Procedure Example: Setting Parameters
The example below explains how to change the Deceleration Time parameter C1-01 to 20.0
from the default setting of 10.0 sec.
6. Press and the LCD Operator Option will display Japanese.
Procedure LCD Screen
1. Frequency Reference diplay.
2. Press to select the Programming Mode.
3. Press to show the Initialization display.
4. Press to select parameter
C1-01 and press .
䉦䉨䉮䊚㩷䉦䊮䊥䊢䉡
- MODE -
U1-01= 0.00Hz
U1-02= 0.00Hz
U1-03= 0.00A
DRV
FREF(OPR)
Rdy
JOG FWD FWD/REV
LSEQ
LREF
HELP
-MODE- PRG
DATA
Programming
FWD
←→
-PRMSET-
Initialization
Select Language
PRG
FWD
A1-00=0
F1 F2
-PRMSET-
C1-01= 0010.0Sec
(0.0~6000.0)
“10.0 sec”
PRG
Accel Time 1
←→
FWD