Need help?Do you have a question about the YASKAWA V1000 SI-S3/V and is the answer not in the manual?
General| Category | DC Drives |
|---|---|
| Enclosure Rating | IP20 |
| Input Voltage | 200-240V AC |
| Control Method | Vector Control |
| Protection Features | Overcurrent, Overvoltage, Undervoltage |
| Communication Interface | Modbus |
| Cooling Method | Fan Cooling |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 65°C |
| Humidity | 5-95% (non-condensing) |
| Model | YASKAWA V1000 SI-S3/V |
| Power Rating | 0.4 kW |
Explains safety message conventions (DANGER, WARNING, CAUTION, NOTICE) used throughout the manual.
Introduces the SI-S3/V as a CANopen option unit for connecting the V1000 drive to a network.
Details how to set the unique CANopen node address using drive parameter F6-35.
Highlights critical DANGER, WARNING, and NOTICE safety information for the installation process.
Provides a detailed guide for physically installing the CANopen Option unit onto the V1000 drive.
Details the essential drive parameters that must be set before initiating network communications.
Lists various drive error codes and their meanings for troubleshooting purposes.
Lists drive-side error codes, causes, and recommended corrective actions for troubleshooting.
Explains how to diagnose and resolve bUS and other communication-related faults.
Lists specific faults related to the CANopen Option and their troubleshooting steps.
Lists registers containing fault and alarm codes for diagnosis.
Provides a list of fault codes for reading fault trace and history registers.
Lists all alarm codes and their corresponding fault names for comprehensive alarm monitoring.
To Next Page