YASKAWA E Series User Manual

12.1 Molded-Case Circuit Breakers and Fuses
12.1.1 Using an AC Power Supply
12-3
12
SERVOPACK Peripheral Devices
12.1 Molded-Case Circuit Breakers and Fuses
12.1.1 Using an AC Power Supply
Use a molded-case circuit breaker and fuse to protect the power supply line. They protect the
power line by shutting OFF the circuit when overcurrent is detected. Select these devices
based on the information in the following tables.
Note: The following tables provide the net values of the current capacity and inrush current. Select a fuse and a
molded-case circuit breaker that meet the following conditions.
• Main circuit and control circuit: No breaking at three times the current value given in the table for 5 s.
• Inrush current: No breaking at the current value given in the table for 20 ms.
Σ-7S SERVOPACKs
* This is the net value at the rated load.
Main
Circuit
Power
Supply
Maximum
Applicable
Motor
Capacity
[kW]
SERVOPACK
Model: SGD7S-
Power Supply
Capacity per
SERVOPACK
[kVA]
*
Current Capacity Inrush Current Rated Voltage
Main Circuit
[Arms] *
Control
Power
Supply
[Arms]
Main
Circuit
[A0-p]
Control
Power
Supply
[A0-p]
Fuse
[V]
MCCB
[V]
Three-
phase,
200 VAC
0.05 R70A 0.2 0.4
0.2
34
34 250 240
0.1 R90A 0.3 0.8
0.2 1R6A 0.5 1.3
0.4 2R8A 1.0 2.5
0.5 3R8A 1.3 3.0
0.75 5R5A 1.6 4.1
1.0 7R6A 2.3 5.7
1.5 120A 3.2 7.3
2.0 180A 4.0 10
0.25
3.0 200A 5.9 15
5.0 330A 7.5 25
0.3 686.0 470A 10.7 29
7.5 550A 14.6 37
11 590A 21.7 54
0.4 114
15 780A 29.6 73
Single-
phase,
200 VAC
0.05 R70A 0.2 0.8
0.2
34
0.1 R90A 0.3 1.6
0.2 1R6A 0.6 2.4
0.4 2R8A 1.2 5.0
0.75 5R5A 1.9 8.7
1.5 120A008 4.0 16 0.25
Single-
phase,
100 VAC
0.05 R70F 0.2 1.5
0.38
0.1 R90F 0.3 2.5
0.2 2R1F 0.6 5
0.4 2R8F 1.4 10

YASKAWA E Series Specifications

General

Brand	YASKAWA
Model	E Series
Category	Servo Drives
Language	English