YASKAWA GA800 Series - Keypad Mode and Menu Displays

4 Maintenance
YASKAWA TOEPC71061779B GA800 Drive Installation Manual 49
• 0.98 N∙m to 1.33 N∙m (8.67 in∙lb to 11.77 in∙lb)
A - Cooling fan
B - Fan unit base
C - Alignment pin on fan unit base
D - Circulation fan connector
Figure 4.45 Install the Cooling Fan
3. Safety the fan cable through the clamp.
A - Space for cable and connector
*1
B - Clamp
Figure 4.46 Safety the Fan Cable
*1 Make sure that the cable and connector are in the correct space.
4. Put the fan unit into the specified location and slide it to the left, then use screws to safety it to the drive.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 in∙lb to 11.77 in∙lb)
Figure 4.47 Install the Fan Unit